Disconnect The Scv300 And Scv320 Expansion Enclosure From The B-Side Of The Chain - Dell SCv3000 Deployment Manual

3 Storage controller 2
5 Expansion enclosure 2
Disconnect the SCv300 and SCv320 Expansion Enclosure
from the B-Side of the Chain
Disconnect the B-side cables from the expansion enclosure that you want to remove.
1 Disconnect the B-side cable (shown in blue) from expansion enclosure 1: bottom EMM, port 1. The A-side cables continue to carry I/O
while the B-side is disconnected.
2 Remove the B-side cable between expansion enclosure 1: bottom EMM, port 2 and expansion enclosure 2: bottom EMM, port 1.
Figure 70. Disconnecting the B-Side Cables from the Expansion Enclosure
1 Storage system
3 Storage controller 2
5 Expansion enclosure 2
3 Connect the B-side cable to expansion enclosure 2: bottom EMM, port 1.
The expansion enclosure is now disconnected and can be removed.
88 Adding or Removing Expansion Enclosures
4 Expansion enclosure 1
2 Storage controller 1
4 Expansion enclosure 1