Table of Contents
Advertisement
SCv300 and SCv320 Expansion Enclosure Front-Panel Features and
Indicators
The front panel shows the expansion enclosure status and power supply status.
Figure 13. SCv300 Front-Panel Features and Indicators
Figure 14. SCv320 Front-Panel Features and Indicators
Item
Name
1
System identification button
2
Power LED
3
Expansion enclosure status
LED
4
Hard disk drives
Icon
Description
The system identification button on the front control panel can be used to
locate a particular expansion enclosure within a rack. When the button is
pressed, the system status indicators on the control panel and the Enclosure
Management Module (EMM) blink blue until the button is pressed again.
The power LED lights when at least one power supply unit is supplying power
to the expansion enclosure.
The expansion enclosure status LED lights when the expansion enclosure
power is on.
•
Solid blue during normal operation.
•
Blinks blue when a host server is identifying the expansion enclosure or
when the system identification button is pressed.
•
Blinks amber or remains solid amber for a few seconds and then turns off
when the EMMs are starting or resetting.
•
Blinks amber for an extended time when the expansion enclosure is in a
warning state.
•
Remains solid amber when the expansion enclosure is in the fault state.
•
SCv300 – Up to 12 3.5-inch SAS hot-swappable hard disk drives.
•
SCv320 – Up to 24 2.5-inch SAS hot-swappable hard disk drives.
About the SCv3000 and SCv3020 Storage System
23
Advertisement
Table of Contents
