Table of Contents
Advertisement
Operation
removes the board, and power is then applied. In this instance, the error would be: CAN'T FIND
GPIB OPTION BOARD.
MENUS
From the operating screen, pressing MENU will take the user to the MAIN MENU. If the cursor is
active, pressing MENU has no effect. Figure
or any other menu, use the ENCODER or the ARROW KEYS to navigate. Once the desired menu
item is highlighted (selected), press ENTER to go to that menu.
Thermocouple Menu
shows the THERMOCOUPLE MENU.
Figure
4-3
When a segmented vertical bar appears to the right
of a menu, more selections than can be displayed
are available. A segment of the bar that points up
denotes additional menu selections above, and a
segment of the bar that points down denotes
additional menu selections below. The MAIN MENU
is such a menu.
MAIN MENU
THERMOCOUPLE
INSTRUMENT MODE
OUTPUT
MEMORY
SEQUENCE
DATA LOGGING
DISPLAY
REMOTE
MAINTENANCE
DIAGNOSTICS
Figure 4-2: Main Menu
THERMOCOUPLE MENU
THERMOCOUPLE TYPE: K-MN175
THERMOCOUPLE OFFSET UNITS: SYSTEM UNITS
THERMOCOUPLE OFFSET: +0.00°C
REF JCT TEMP UNITS: SYSTEM UNITS
REF JCT TEMP: +0.00°C
Figure 4-3: Thermocouple Menu
4-2
shows the MAIN MENU. Once at the MAIN MENU
NOTE
4-8
Advertisement
Table of Contents
