Figure 4-12: Web Browser Using The Ethernet Interface - Ectron 1140A Instruction Manual

Operation
directly enter desired port number and then press ENTER. If the user wished to use the arrow keys
and ENCODER, note that number places are added with the left arrow key.
DHCP Disabled
When DHCP is DISABLED, the user must enter additional settings: IP ADDRESS, NETMASK,
GATEWAY, and NAMESERVER. These settings should be obtained from the system administrator
for the network in which the Model 1140A is connected. To enter them, highlight the desired
number, press ENTER, key in the number, and again press ENTER.
Browser Screen
Once all the settings have been entered, the user may want to use a web browser to perform
remote changes to the Model 1140A. To begin this feature, open the computer's browser. In the
address field type in the HOST NAME (default ECTRON1140A) or fully qualified domain name and
press the computer's ENTER. Once the screen loads, the user can change settings on the computer
and click on SUBMIT to effect the changes. See Figure 4-12. If Javascript is supported in the
browser, the screen will update every second.

Figure 4-12: Web Browser Using the Ethernet Interface

4-20