Table 6-1: Remote Command Summary - Ectron 1140A Instruction Manual

Remote Operation
If any front-panel key is pressed while in remote mode, a warning is displayed and the operator
asked whether to return to local mode. Returning to local mode allows front-panel control.
However, receipt of any remote command will again place the Model 1140A in remote mode.
Command String (SCPI Syntax)
Source Mode
:SOURce:TEMPerature:VALue
:SOURce:VOLTage:VALue
:OUTPut:OVERload?
:OUTPut:STANdby
Meter Mode
:SENSe:VALue?
Thermocouple
:INSTrument:THERmocouple:TYPE:CATalog?
:INSTrument:THERmocouple:TYPE
:UNIT:THERmocouple:OFFSet
:INSTrument:THERmocouple:OFFSet:VALue
:UNIT:REFJunction
:OUTPut:REFJunction:VALue
Instrument
:INSTrument:MODE
:INSTrument:MODE:ENTRy
:UNIT:TEMPerature
:INSTrument:TEMPerature:STANdard
:UNIT:VOLTage
Output
:INSTrument:MATerial
:INSTrument:TERMinal
:UNIT:VOLTage:OFFSet
:INSTrument:VOLTage:OFFSet:VALue
:INPut:AZERo
:INPut:AZERo:STATe
:INPut:AZERo:VALue?
System
:STATus:PRESet
:SYSTem:REMote
:SYSTem:LOCal
:SYSTem:DATE?
:SYSTem:TIME?
:SYSTem:SERialno?
:MEMory:CATalog
:SYSTem:ERRor?
:SYSTem:ERRor:ALL?
:SYSTem:ERRor:CODE?
:SYSTem:ERRor:CODE:ALL
:SYSTem:ERRor:COUNt
Data Logging
:LOG:SETup?
:LOG:DATA?
:LOG:SETup:FIRst?
:LOG:SETup:NEXt?
:LOG:DATA:FIRst?
:LOG:DATA:NEXt?
* To query, type a question mark (?) immediately after the command string as shown on query-only commands.

Table 6-1: Remote Command Summary

Arguments
Temperature
Voltage
{ON, OFF}
Thermocouple type
{C, F, R, K, SYSTEM}
Temperature
{C, F, R, K, SYSTEM}
Temperature
{SOUR, METER}
{VOLT, TEMP}
{C, F, R, K)
{ITS-90,IPTS-68}
{mV, V)
{ALLOY, COPPER}
{TC, POST}
{mV, V, SYSTEM}
Voltage
OFF
Data Logging
Function
Simulation temperature
Source voltage
Output overload status
Toggle standby mode
Retrieve meter-mode value
Catalog of thermocouple types
Thermocouple type
Thermocouple offset units
Thermocouple offset value
Reference-junction units
Reference-junction temperature
Source or meter mode
Voltage or temperature mode
System temperature units
System temperature standard
System voltage unit
Thermocouple or copper wire
Output terminal
Voltage offset units
Voltage offset
Performs autozero function
Turn autozero off
Retrieve autozero offset
Revert user settings to defaults
Place unit in remote control
Place unit in local control
Retrieve system date
Retrieve system time
Retrieve unit's serial number
Retrieve memory file catalog
Retrieve first error from queue
Retrieve all errors from queue
Retrieve code of next error
Retrieve code of all errors
Retrieve count of errors in queue
Retrieve log setup conditions
Retrieve logged data
Retrieve first log setup line
Retrieve next log setup line
Retrieve first log data point
Retrieve next log data point
6-2
Command * Query
 
 

 


 
 
 
 
 
 
 
 
 
 
 
 
 
 

 


















