PeakTech 3445 Operation Manual page 53

4.3. Understanding the Rotary Switch
Select a primary measurement function by positioning the rotary
switch to one of the icons around its perimeter. For each function,
the Meter presents a standard display for that function (range,
measurement units, and modifiers). Button choices made in one
function do not carry over into another function.
V~
V–
mV
 /
/ CAP
Hz%
TEMP
A
mA
µA
LowZ (P3445 only)
AC voltage measurements
DC and AC+DC voltage measurements
DC/AC milli-volts measurements
Resistance, Diode test, capacitance and
continuity measurements
Frequency measurements
Temperature measurements
AC/DC amps measurements
AC/DC milliamps measurements
AC/DC microampere measurements
Low Impedance measurement for DCV / ACV
-52-