PeakTech 3445 Operation Manual page 44


Do not input values over the maximum range of each
measurement to avoid damages of the meter.

Do not turn the rotary function switch during voltage or current
measurement, otherwise the meter could be damaged.

Use caution when working with voltages above 35V DC or 25V
AC. These Voltages pose shock hazard.

Charge the battery as soon as the battery indicator "BAT"
appears. With a low battery, the meter might produce false
reading that can lead to electric shock and personal injury.

Fetch out the battery when the meter will not be used for long
period.

Periodically wipe the cabinet with a damp cloth and mid
detergent. Do not use abrasives or solvents.

The meter is suitable for indoor use only

Do not operate the meter before the cabinet has been closed
and screwed safely as terminal can carry voltage.

Do not store the meter in a place of explosive, inflammable
substances.

Do not modify the equipment in any way

Do not place the equipment face-down on any table or work
bench to prevent damaging the controls at the front.

Opening the equipment and service – and repair work must only
be performed by qualified service personnel

Measuring instruments don't belong to children hands.
Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available mild
household cleanser. Ensure that no water gets inside the equipment
to prevent possible shorts and damage to the equipment.
-43-