Table of Contents
Advertisement
5
BB701
Section 5 - Maintenance
5.1
Calibration
This unit has been fine tuned at the factory and calibrated to give optimum
performance of its full temperature range. It is recommended that the unit be
returned annually for re-calibration.
5.2
Cleaning
Remove all electrical connections and power before attempting any maintenance or
cleaning.
5.2.1
Main Body
Only a damp soft rag with a mild cleaning solution should be used to clean the
main body of this unit.
5.2.2
Target Plate
Do not attempt to clean the target plate. The target plate has a special coating
applied and cleaning may change the emissivity and performance of your unit.
5.2.3
Fan
The fan filter should be removed and cleaned as a minimum, monthly, by
washing the filter with warm water and then blowing dry with air. It can
be removed by firmly pulling the black plastic frame outward. The internal
protective grill that is seated against the fan can be cleaned with a soft bristle
brush.
5.3
Fuse Replacement
Disconnect all power from source before attempting fuse replacement.
5-1
CAUTION:
WARNING:
Hide quick links:
Advertisement
Table of Contents
