GE MultiNet Instruction Manual page 14

Page 10 of 15
9. For this example, we are going to configure the "Quick Connect" device as our PQM. Select
Ethernet as the interface and fill in the IP address and slave address of the PQM.
10. Click Read Order Code. Viewpoint will locate the PQM device and connect to it. Once this order
code has been read, click OK to save the configuration.
11. Select the Plug & Play > Create Schema menu item to open the Plug and Play Device dialog
box. Ensure that "PQM" is selected within the drop down selection. Click Create to automatically
create plug and play screens for the PQM.
12. When finished, the plug and play menu will appear, showing our PQM labeled as Quick
Connect. Click the Dashboard button below the PQM icon to view the device information. We
have now successfully accessed our PQM through MultiNet.
http://www.GEmultilin.com
Courtesy of NationalSwitchgear.com
Figure 6: Dialog Box for Creating "plug and play" Screens
Figure 7: Plug and Play Menu Showing Attached PQM.
MultiNet
GE Digital Energy