Table of Contents
Advertisement
Page 12 of 15
8. Open the MultiNet setup program and follow the procedure detailed within the CONFIGURATION
section. For this example use the IP address of 192.168.1.2, subnet of 255.255.255.0 and a
gateway of 192.168.1.1.
9. Once the configuration of the MultiNet device is complete, return the laptop to its previous
settings using the recorded values from step 5. If the MultiNet device was configured properly,
communications may be tested on the connected network using enerVista, as shown in the first
example.
http://www.GEmultilin.com
Courtesy of NationalSwitchgear.com
Figure 8: Setting the IP Address on a Laptop.
MultiNet
GE Digital Energy
Advertisement
Table of Contents
