MultiNet
CONFIGURATION
Before starting, verify that the Ethernet network cable is properly connected to the Ethernet port on
MultiNet. To connect MultiNet directly to the Ethernet port of a PC or laptop, use a crossover cable; to
connect MultiNet directly to an Ethernet network, use a regular pass-through RJ-45 cable.
To setup MultiNet for Ethernet communications use the following procedure:
1. Install and start the latest version of the MultiNet setup software (available from the GE Multilin
Products CD or online from http://www.GEindustrial.com/multilin; see the previous section:
Getting Started with MultiNet Software).
1. Select the Communications > Device Setup menu item to open the Device Setup window.
2. The left pane shows the currently configured MultiNet Devices. Click the Add Device button to
add a new MultiNet device to the device list.
3. Enter the desired name in the Device Name field and a description (optional) of the device.
GE Digital Energy
Courtesy of NationalSwitchgear.com
Figure 3: MultiNet Setup Software Main Screen
Page 7 of 15
http://www.GEmultilin.com