Fastening The Array To The Rack - Hitachi AMS 2100 Hardware Manual

Fastening the array to the rack

1. As shown in
M5×10 binding screws provided with the rack.
Figure 5-31: Fastening Front Side of the Array
Item Description

Array

Mounting Screw, M5-10
2. As shown in
rails.
3. Shift each of the two stoppers in the direction shown by the arrow and
make it contact the frame.
4. Tighten the binding screws.
5–34
Figure 5-31, fasten the array to the rack rails with four
Table 5-6: Fastening Front Side of the Array
Item

Mounting Slot

Nut
Figure 5-32, fasten the rear side of the array to the rack
Installation
Hitachi AMS 2100/2300 Storage System Hardware Guide
Description Item


Description
Rack
Rail