Base Unit Rear Panel; Overview - Hitachi AMS 2100 Hardware Manual

Base unit rear panel

This section describes the components on the rear panel of both the AMS
2100 and the AMS 2300. While most of the components on the rear panels
are the same, some components in the base units are different.

Overview

Figure 4-6
Channel AMS 2100 base unit. Except for the number of Fibre Channel host
connectors on the controllers, the Fibre Channel version of the AMS 2100
rear panel is identical to the AMS 2300. The rear panels of the iSCSI
versions of the two models are the same.
The two controllers in each model array are identical and can be installed in
either slot. The Fibre Channel and iSCSI controllers for the AMS 2100 and
the AMS 2300 are described further on in this chapter.
Table 4-6: AMS 2100 Base Unit Rear Panel Components
Item
Power Supply 0

See
page 4-9
Controller 1

See
details.
4–8
shows the main hardware components on the rear side of a Fibre
Figure 4-6: AMS 2100 Base Unit Rear Panel Components
Description
Base unit power supplies on
for details.
Control units on page 4-10
Hardware components
Hitachi AMS 2100/2300 Storage System Hardware Guide
Item Description

Controller 0

for Power Supply 1