Hitachi AMS 2100 Hardware Manual page 209

Set up host ports
As with the management ports, Navigator 2 queries the host ports on the
array and lists their current settings in the Setup Host Ports dialog box as
shown above.
1. To use the default settings, click Next> to continue to the Set Up Spare
Drive screen.
2. To change the settings, use the pull-down menus for the Transfer Rate
and/or Topology fields for each ports as needed to match the settings on
the host ports. Then click Next> to continue to the Set Up Spare Drive
screen.
Hitachi AMS 2100/2300 Storage System Hardware Guide
Configuration
7–27