7. If an entry appears in the failure parts list window, click Show Details
in the lower right corner of the screen for detailed information (see
Figure
•
•
Troubleshooting based on LED indications
This section provides step-by-step procedures to help determine the cause
of failures that are indicated by the LEDs on the array. This section is
intended to be used along with
page
8-6.
Verify that a failure is recovered after taking the appropriate actions for the
following LED indications.
8-5). To remove the information, click Close.
Figure 8-5: Example of an Alarm Information Window
Troubleshooting
Hitachi AMS 2100/2300 Storage System Hardware Guide
Table 8-2:LED Failure Indications, on
8–13