...2.10 Ratio Station (Templates 16 and 17)
SOAK
t. 3. 9
9. 3 0
•1
is displayed only if ramp/soak features are enabled – see Section 5.5, Level 9 – Set
Profile Status
Point Configuration.
•2 Segment time adjustment can be disabled in the Ramp/Soak profile control level – see Section
3.4 frame
r. 1 8
.
•3 Segment skip can be disabled in the Ramp/Soak profile control level – see Section 3.4
frame
.
r. 1 7
Profile Status
•1
SOAK
•2
rAMP
StOP
•3
ENd
O. H Ld
M. H Ld
H. H Ld
r. H Ld
r. r MP
Time Remaining in Segment
[0.0 to 99.9 hours or minutes]
Allows the total segment time to be increased or
decreased by the Time Adjust Value set in the
Profile Control Level. If the current segment is a
ramp, it will change the ramp rate.
Current Program/Segment
[1.01 to 9.30]
When the program is running or held:
Press
segment.
Press
current segment.
Return to
2 OPERATOR LEVEL...
– Soak segment running
– Ramp segment running
– Stopped
– End
– Operator hold
– Manual hold
– Holdback hold
– Retort hold
– Retort ramp
X.NN
Current Segment Number
Current Program Number
to skip forward to the start of the next
to skip backwards to the start of the
display
Actual Ratio
33