Disabling Of The Buzzer; Variation Of Date And Time; Timer Bypass - AVS Electronics CAPTURE User Manual

Disabling of the buzzer

The sound of the internal buzzer in each keypad can be disabled.

Digit User Code
Note: if the user code is associated to multiple sectors and the "Skip sector selection" option is
not active, you will be asked to select the sector to work in.

Press (1)

Press () repeatedly to the "Beep of keys" step and then press (ENT)

Press (CLR) key to vary - Press (ENT) key to confirm

Press (ESC) key to exit
In order to re-enable the sound of the internal buzzer in each keypad, the same procedure
used for buzzer disabling must be adopted.

Variation of Date and Time

When the control panel is off, it is possible to change the Date and Time.

Digit User Code
Note: if the user code is associated to multiple sectors and the "Skip sector selection" option is
not active, you will be asked to select the sector to work in.

Press (1)

Press () repeatedly to the "Date/Time" step and then press (ENT)

Press (CLR) to change - Enter the desired numerical value - Press (ENT) to confirm varia-
tions; With () you can see the other programming (Hour -Minutes - Day - Month - Year)

To leave, press (ESC)

Timer bypass

And 'possible inhibition of the Scheduler.

Digit User Code
Note: if the user code is associated to multiple sectors and the "Skip sector selection" option is
not active, you will be asked to select the sector to work in.

Press (1)

Press () repeatedly to the "Timer bypass" step and then press (ENT)

Press (CLR) key to vary - Press (ENT) key to confirm

Press (ESC) key to exit
In order to re-enable the Timer the same procedure used for disabling must be adopted.
- 18 -