Max RB515 Operating And Maintenance Manual page 19

45°
Arm
During tool operation
● Do not move the tool during tying operation until the tool stops tying automatically.
Arm
Re-bars
4 For proper tightness
① Tilt the tool 45° angle to the crossed re-bars.
② Apply the tool perpendicularly to the surface of crossed re-bars.
③ Tie in alternate direction.
④ Cross tie.
Bent the tail of first tie before making second tie.
⑤ When you need extra tightness, place re-bars at the top of the Arm part.
19