Touch Pen Preparations/Touch Action; Inserting The Battery; Touch Action And Touch Mode; Touch Action - Sharp PN-L702B Operation Manual

Touch Pen Preparations/Touch Action

Inserting the battery

1. Rotate the battery cap and remove it, and then pull out the
cover.
2. Insert the supplied battery (LR-03 ("AAA" size)) in the
orientation shown, and attach the cover and battery cap.
TIPS
• The supplied battery (LR-03 ("AAA" size)) may be
exhausted in a short time, depending on how it was stored.
• If the touch pen will not be used for an extended time,
remove the battery from the touch pen.
• For the battery, use an alkaline battery.
18
E

Touch action and touch mode

Touch panel actions that can be used vary depending on the
touch mode setting in the touch panel driver.
In Windows XP/Windows Vista, dual touch mode cannot be
used.
Touch mode
Battery cap

Touch action

Single-tap
Double-tap
Drag-and-drop
Flicks
Press-and-hold
Pan
Zoom
Press-and-tap
TIPS
• Settings for touch panel operation such as the touch mode
and actions of the function buttons can be changed in the
touch panel driver. For details, see the manual for the touch
panel driver.
• In Windows 7, if the checkmark has been removed from
"Enable multi-touch gestures and inking" in "Pen and touch"
in Control Panel, select the checkbox.
Touch action
When the touch panel is touched with the pen, the input mode
changes to pen mode. When touched with your finger, the
input mode changes to handwriting mode. The input mode is
set by default to change automatically (Standard mode).
TIPS
• For the procedures for using the touch pen in the Pen
Software, see the Pen Software Operation Manual.
nCommon finger and pen actions
Single-tap
Same action as left-clicking a mouse.
Touch with your finger/pen.
Single touch mode Dual touch mode
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes