Tools Required - DX Engineering DXE-MBVE-5A Instructions Manual

PLEASE
- Read the entire manual to be familiar with the various options
available. Some of the assembly steps are common for all models.
This manual describes in detail the DXE-MBVE-5A-4UPR antenna package
which includes the basic antenna with the DXE-RADP-3 Radial Plate, DXE-
Other sections in this manual describe the models using the remote tuner
Refer to the DXE-MBVE-5A60MCK if you are converting the MBVE-5A to a
Upgrade kits for existing MBVE-5/5A systems use the kit parts for MFJ-
993/994BRT or MFJ-998RT remote tuner option installations.
The vertical elements for all models are the same.
The SAF-T-TILT™ Base is the same for all models with one exception. The
thick wall base tube is longer for the tube mounted remote tuner options.
This manual describes in detail the DXE-MBVE-5A-4UPR antenna package which includes
the basic antenna with the DXE-RADP-3 Radial Plate, DXE-43 UNUN and DXE-UN-BRKT.

Tools Required

Two 7/16" wrenches, (one of them should be open-end)
5/16", 3/8", 9/16", and 3/4" wrenches or
5/16", 3/8", 9/16", and 3/4" sockets and drive
Medium size flat blade screwdriver or 5/16" nut driver for the element clamps
Medium size flat blade screwdriver or 1/4" nut driver for the smaller element clamps
Tape measure
Black Felt-tip marker or pencil
43 UNUN and DXE-UN-BRKT.
options.
Mono-Band 60 Meter Antenna
- 4 -