Table of Contents
Advertisement
Building Technologies
Fire Safety
3. Push the connection wires through the rubber base from the rear.
4. Install the detector base.
5. Place a point detector or alarm sounder in the detector base.
6. Turn the point detector or alarm sounder to the right to screw it firmly into the
detector base.
7. Screw the supplied set screw into the point detector or alarm sounder until it no
longer protrudes. This step is not needed when using detector locking device
FDBZ293.
8. Fold the folded-back sealing lip over the point detector or alarm sounder.
The sealing element is installed.
Mounting / Installation
Sealing kit FDBZ295
010095_j_en_--
2013-02-22
5
31
Hide quick links:
Advertisement
Table of Contents
