Subscribe to Our Youtube Channel
Related Manuals for Rose electronics CNV-VGADVI-I
Summary of Contents for Rose electronics CNV-VGADVI-I
- Page 1 VGA to DVI Converter / Scaler Installation and Operations Manual 10707 Stancliff Road 800-333-9343 Houston, Texas 77099 www.rose.com...
- Page 3 LIMITED WARRANTY Rose Electronics warrants the VGA to DVI converter to be in good working order for one year from the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working order at any time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the Unit as set forth below.
-
Page 4: Table Of Contents
TABLE of CONTENTS Contents Page # Disclaimer.......................1 System introduction ..................1 Rose Electronics web site ................1 Product Registration ..................1 Features ......................2 Package Contents ..................2 Front Panel .....................3 Rear Panel......................3 Installing the VGA to DVI converter / scaler...........4 OSD-Main menu.....................5 PC Menu .....................6 Color Menu ....................7... -
Page 5: Disclaimer
Thank you for choosing the Rose Electronics VGA to DVI converter. The converter is the result of Rose Electronics commitment to providing state-of- the-art solutions for today’s demanding workplace. The VGA to DVI converter is designed to connect analog graphic cards to DVI compliant digital monitors. -
Page 6: Features
Features Supports RGBHV, YPbPr or YCbCr analog PC or HDTV signal input formats . The output is digital + analog PC or HDTV signal in the format of digital RGBHV bit stream plus analog RGBHV, known as DVI-I (Integrated digital and analog). Automatically detects the input resolution Output resolution and refresh rate can be selected through OSD menu and front panel push buttons. -
Page 7: Front Panel
PANEL DESCRIPTION Front Panel Connector – DVI-I Selector buttons Menu Displays / Hides the Menu system + / - Changes the value within the Menu System, such as brightness, color, output resolutions, etc. These buttons are also used to navigate the Menu System. Rear Panel Not Used VGA In... -
Page 8: Installing The Vga To Dvi Converter / Scaler
INSTALLATION Installing the VGA to DVI converter / scaler Installation of the VGA to DVI converter/scaler is a very easy process. 1. Connect a VGA cable from the VGA source to the VGA In connector. 2. Connect a DVI cable between the DVI Out connector and the DVI display. -
Page 9: Osd-Main Menu
ON-SCREEN DISPLAY OSD-Main menu To access the main menu, press the “Menu” button on the front panel. The main menu will display as shown below. Use the + or – key to highlight the needed menu and press the “Menu” button to access that menu. The 5 ICONS on the left of the OSD display are for selecting the different menus. -
Page 10: Pc Menu
PC Menu To access the PC Menu, press the Menu button on the front panel. Use the + or - buttons to highlight the PC Menu icon. Press the Menu button to enter the PC Menu. Use the + or - buttons to scroll through each of the parameters. -
Page 11: Color Menu
Color Menu To access the Color Menu, press the Menu button on the front panel. Use the + or - buttons to highlight the Color Menu icon. Press the Menu button to enter the Color Menu. Use the + or - buttons to scroll through each of the parameters. -
Page 12: Output Menu
Output Menu To access the Output Menu, press the Menu button on the front panel. Use the + or - buttons to highlight the Output Menu icon. Press the Menu button to enter the Output Menu. Use the + or - buttons to select an output resolution. -
Page 13: Osd Menu
OSD MENU Use the + or - buttons to highlight the OSD Menu icon. Press the Menu button to enter the OSD Menu. Use the + or - buttons to highlight the desired parameter. Press the Menu button to make changes. Use the + or - buttons to change the values. -
Page 14: Information Menu
Information Menu To access the Information Menu, press the Menu button on the front panel. Use the + or - buttons to highlight the Information Menu icon. Figure 6. OSD “Information” Menu Resetting the Unit To reset the VGA to DVI unit: 1. -
Page 15: Appendix A - Specifications
5.8 x 4.1 x 1.0 in (14.7 x 10.4 x 2.5 cm) Shipping Weight 3.0 lbs (1.36 Kg) Appendix B – Part Numbers CNV-VGADVI-I Unit only CNV-VGADVI-K Unit + 5’ HD15MM Cable CAB-DVIMM006 CNV-VGADVI-K1 Unit + 6’ DVIMM Cable CAB-DVIMM006 CNV-VGADVI-K2 Unit + 5’... - Page 16 10707 Stancliff Road Phone: (281) 933-7673 Houston, Texas 77099 WWW.ROSE.COM...
Need help?
Do you have a question about the CNV-VGADVI-I and is the answer not in the manual?
Questions and answers