1.3.2
Ports & Buttons
RESET
button
WPS button
Press the WPS button down for 1 second to establish a WPS connection, the WPS LED blinks.
RESET button
With the PWR LED solid on, press the RESET button down using a paper clip. All LEDs blink once at the
same time, and then light off. Wait about for 40 seconds until the PWR LED lights solid on again. The
repeater is reset successfully.
LAN port
−
In Repeater mode, this port allows a wired device, such as a desktop computer, to be connected to
A301 to access the internet.
−
In AP mode, connecting this port to a router or a modem turns A301 into an AP to share
your wireless network.
WPS button
LAN port
3