Tenda A15 Quick Installation Manual

Quick Installation Guide
AC750 Dual Band WiFi Repeater
Method 1: Extending Your WiFi Network Using Web UI
1
Power on the Repeater
Plug the repeater into a power outlet
near the router in the same room.
Wait until the PWR LED turns solid blue.
3
Relocate the Repeater
For better performance, follow the on-screen tips or
the steps below to relocate your repeater.
1
. Plug the repeater into an outlet halfway between
the router/modem and the WiFi dead zone.
The location you choose must be within the range
of your existing WiFi network.
2
. Wait until the Signal LED turns blue. If not, relocate
the repeater closer to the router/modem.
Method 2: Extending Your WiFi Network Using WPS
1
Power on the Repeater
Plug the repeater into a power
outlet near the router in the
same room.
Wait until the PWR LED turns
solid blue.
Model: A15
2
Extend Your WiFi Network
1
2
PWR
3
LED Descriptions
PWR LED
WPS LED
Signal LED
. Connect your WiFi device to the repeater's
WiFi network Tenda_EXT.
Ensure that the Mobile Data (if any)
function of your WiFi device is disabled.
WLAN
Tenda_EXT
. Start a web browser, enter re.tenda.cn or
192.168.0.254 in the address bar to log in.
re.tenda.cn
. Create a login password for later login
(recommend).
Password (5-32 characters)
Confirm
Next Not Now
WiFi router/modem
Signal
Antennas upward
and vertical to the
ground
A15
Blue: Good connection
Red: Bad connection
2
Extend Your WiFi Network
1
. Press the WPS button on the router and within 2 minutes press the WPS button
on the repeater.
PWR
2
. Wait until the Signal LED on the repeater turns solid blue or red. If not, try Method 1.
The repeater has started.
Solid on
Blinking The repeater is starting.
The repeater is not powered on.
Off
On A WPS connection has been established.
Blinking A WPS connection is being established.
Off The WPS function is disabled.
The repeater has connected to your existing WiFi
Solid blue
router/modem, and its position is proper.
The repeater is too far away from the router.
Solid red
Relocate the repeater closer to the router.
The repeater does not connect to your WiFi router/
Off
modem.
4
. Select a WiFi network (SSID) you want to
extend.
Select a WiFi network you want to
extend...
My_home_wifi
Rescan
5
. Enter the password of the WiFi network
you want to extend. Set your repeater's
SSID (optional), and click Extend.
Your existing WiFi network
Enter the password of "My_home_wifi "
The extended WiFi network
SSID
My_home_wifi_5GEXT
Password of the extended network is
same as your existing WiFi network.
Back
Wait a moment, the Extended successfully!
page appears.
4
Connect to the Internet
Connect your WiFi devices to the repeater
using the SSIDs set by yourself, or your
router's/modem's SSID with the suffix _EXT
or _5GEXT, and using the WiFi password
same as your existing WiFi network.
You can use Method 2 if your router/modem has a WPS button, which
may be indicated by , , or
Press
Switch Mode
Extend
. Otherwise, use Method 1.