Tenda A301 User Manual page 36

A.2 Default Parameter Values
The following table lists the default parameter values of the repeater.
Parameter
Login address
Login password
Operating mode
IP address
Subnet mask
DHCP server status
SSID
WiFi Password
Blacklist
Default Value
re.tenda.cn
None
Repeater mode
192.168.0.254
*After expanding the network of the WiFi router/modem successfully,
the repeater obtains an IP address automatically from the DHCP server
of the upstream device.
255.255.255.0
*After expanding the network of the WiFi router/modem successfully,
the repeater obtains an IP address automatically from the DHCP server
of the upstream device.
Enabled
*It depends. If the repeater expands the network of the WiFi
router/modem successfully, the DHCP server will be disabled.
Otherwise, it will be enabled.
Tenda_EXT
None
None
31