Tenda A301 User Manual page 32

Reboot
You are recommended to reboot the repeater when the configured parameters do not take effect, or the
repeater does not work properly.
To reboot A301, choose Administration, click Reboot, and then click Reboot on the dialogue box that appears.
Wait a moment until the progress bar is complete.
Reset
You are recommended to reset the repeater if you forget your login password, or you cannot find the problem
that interrupts your repeater's WiFi network service.
To reset the repeater, use either of the following options:
Option 1:
With the PWR LED solid on, press the RESET button down using a paper clip. All LEDs blink once at the same
time, and then light off. Wait about 40 seconds until the PWR LED lights solid on again. The repeater is reset
successfully.
27