Tenda A301 User Manual page 25

Step 7 Connect your WiFi devices to the re-extended WiFi network using the SSIDs shown on the page.
Step 8 Plug the repeater into an outlet halfway between the router and the WiFi dead zone. The location
you choose must be within the range of your existing WiFi network.
Wait about 1 minute. Use the following status of the Signal LED to see whether the repeater is at a
Step 9
proper position.
−
Blue: Proper position
−
Red: Move the repeater closer to the WiFi router/modem
−
Off: Move the repeater closer to the WiFi router/modem
20