Your shipment includes: Showtec LED Light Bar 8 • 2 brackets and screws • Volex IEC powercable 1,5m •...
Page 4
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK SILVER NEUTRAL YELLOW/GREEN GREEN GREEN PROTECTIVE GROUND Make sure that the device is always connected properly to the earth! Improper installation can cause serious damage to people and property! Ordercode: 42199...
After this period, complaints will not be handled anymore. Complaints will only be considered if the client has so far complied with all parts of the agreement, regardless of the agreement of which the obligation is resulting. Ordercode: 42199...
LED Light Bar 8 Description of the device Features LED Light Bar 8 is a LED fixture from Showtec. • LEDs: 240 RGB high intensity 10mm LEDs (Red 96, Green 72, Blue 72) • Beam angle: 30 º • Inexpensive batten effect •...
DMX-cable, it functions as a stand-alone device. 03) If device is set to , then the fixture can be manually controlled. 04) Please see page 15 for more information about manual control Mode. Ordercode: 42199...
14-17 (Built-in Programs). This means you can set your desired operation mode on the master device and all slave devices will react the same as the master device. Multiple Light Bars (Master/Slave control) Fig. 02 Ordercode: 42199...
Do not supply power before the whole system is set up and connected properly. Multiple Light Bars DMX Set Up Fig. 03 Note: Link all cables before connecting electric power! Ordercode: 42199...
DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m), FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m). • DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30. Ordercode: 42199...
• The controller is switched off or defective, the cable or connector is defective, or the signal wires are swapped in the input connector. Note: It is necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure proper transmission on the DMX data link. Ordercode: 42199...
• In master/slave mode, the master fixture can execute the built-in programs, all the slave fixtures will work the same. • When operating the master/slave chain, you can identify the master fixture from the slave fixtures easily. The master doesn’t have any cable plugged into the DMX input connector. Ordercode: 42199...
02) With this menu you can set the Built-in Program Mode of the LED Light Bar. You can choose 22 built-in programs , by using the Up and Down buttons. 03) Press Setup to enter the built-in programs Menu. You can choose 3 different sub menus: See the next page to view the complete menu. Ordercode: 42199...
Page 17
Red-Green-Blue Flash from 00-99 Speed from 01-99, Full Flash Frequency 00-99 Fade Time from 00-99 Speed from 01-99, Full Flash Frequency 00-99 Fade Time from 00-99 The specialty about menu 21 and 22 is, that you can combine both menus!!!! Ordercode: 42199...
Page 18
LED Light Bar 8 Examples Menu 21 Menu 22 Ordercode: 42199...
03) Press Setup to enter the AUTO Menu. You can choose 4 different sub menus. Number of Loops from 01-100 Speed from 01-99 and FL Fade Time from 00-99 Flash Frequency from 00-99 Use the SETUP button to scroll through the menu. Ordercode: 42199...
Channel 4 – Red Section 2 0-255 Gradual adjustment Red from 0 – 100% Channel 5 – Green Section 2 0-255 Gradual adjustment Green from 0 – 100% Channel 6 – Blue Section 2 0-255 Gradual adjustment Blue from 0 – 100% Ordercode: 42199...
Channel 4 – Red Section 2 0-255 Gradual adjustment Red from 0 – 100% Channel 5 – Green Section 2 0-255 Gradual adjustment Green from 0 – 100% Channel 6 – Blue Section 2 0-255 Gradual adjustment Blue from 0 – 100% Ordercode: 42199...
Page 22
Channel 22 – Red Section 8 0-255 Gradual adjustment Red from 0 – 100% Channel 23 – Green Section 8 0-255 Gradual adjustment Green from 0 – 100% Channel 24 – Blue Section 8 0-255 Gradual adjustment Blue from 0 – 100% Ordercode: 42199...
Channel 2 – No Function (Channel 1 is set between 0-7 0-255 No function Channel 2 – Speed (Channel 1 must be set between 8-231 0-255 From slow to fast Channel 2 – Sensitivity (Channel 1 must be set between 232-255 0-255 From low to high sensitivity Ordercode: 42199...
0-255 From slow to fast Channel 5 – Sensitivity (Channel 4 must be set between 232-255 0-255 From low to high sensitivity Channel 6 – No Function (Channel 4 is set between 0-7 or 232-255 0-255 No function Ordercode: 42199...
04) The electric power supply cables must not show any damages or material fatigue. The Showtec LED Light Bar 8 requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply and then wipe the cover with a damp cloth.
05) If you are unable to determine the cause of the problem, do not open the LED Light Bar 8, as this may damage the unit and the warranty will become void. 06) Return the device to your Showtec dealer. No Response to DMX Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction.
Page 27
No light or lamp • Disconnect the fixture and return it cuts out LEDs damaged to your dealer intermittently The power supply settings do not • Disconnect fixture. Check settings match local AC voltage and and correct if necessary frequency Ordercode: 42199...
LED Light Bar 8 Product Specifications Model: Showtec LED Light Bar 8 Input Voltage: 100-240 VAC Drive Current: 25mA Continuous Power 60 Watt Peak Power 130 Watt DMX linking: 30pcs Fuse: 1A / 250V Dimensions: 1070 x 65 x 88 mm (LxWxH)