Page 1
Compact Studiobeam Smart White ORDERCODE 42498 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands Phone: +31 45-5667700...
Page 2
For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
Warning FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling.
Page 5
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
Operating Determinations • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. • The minimum distance between light-output and the illuminated surface must be more than 1 meter. •...
Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Description of the device Features The Showtec Compact Studiobeam Smart White is a LED parcan with high output and great effects. • High light output and never change lamps again! • Stylish design • Convection cooling which eliminates the use of fans and noise •...
Overview Fig. 1 DMX signal connector (IN) DMX signal connector (OUT) 4) Earth connection Powercable 5) Power Input (Blue): This connector is the input power for this unit (Max 20A). 6) Mode, Up and Down Buttons 7) Power Thru (Grey): This connector sends the power to the next unit (Max 20A). Installation Remove all packing materials from the Compact...
Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Damages caused by non-observance are not subject to warranty. Control Modes There are 3 modes: •...
Multiple Mini StudioBeams DMX Set Up Fig. 3 Note : Link all cables before connecting electric power Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode.
The LED Par 64 can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel Fig. 6 A. LCD Display C. Up Button B. MODE button D. Down Button Control Mode The fixtures are individually addressed on a data-link and connected to the controller.
DMX Channels In order to receive a DMX signal, the controller must be attached to a DMX controller by a 3-pin DMX cable and the DMX controller must be turned on. The Compact Studiobeam system can operate as a 1, 2, 3, 7 Channel DMX fixture. 1 DMX Channel Channel 1 –...
7 DMX Channels Channel 1 – Cool White 0-255 Cool White from 0 – 100% Channel 2 – Warm White 0-255 Warm White from 0 – 100% Channel 3 – Amber 0-255 Amber from 0 – 100% Channel 4 – Macro Colors (Combination of Cool White, Warm White and Amber) Value Macro Cool White...
3. Mechanically moving parts like axles, eyes and others may not show any traces of wearing. 4. The electric power supply cables must not show any damages or material fatigue. The Showtec Compact Studiobeam requires almost no maintenance. However, you should keep the unit clean.
Page 18
Problem Probable cause(s) Remedy No power to the fixture • Check that power is switched on One or more and cables are plugged in. If the fixtures are problem persists contact your dealer completely dead. for servicing. Fixtures reset The controller is not connected. •...
Product Specification Model: Showtec Compact Studiobeam Smart White • High light output and never change lamps again! • Stylish design • Convection cooling which eliminates the use of fans and noise • Very suitable for illuminating trusses as well as background lighting.