Sensor Setup - MSA ALTAIR 4X Operating Manual

• Press ▼ button to decrease values by one or toggle a selection
ON or OFF.
Press and hold ▼ button to decrease values by 10.
The following options are available by pressing the ▼ and ▲ buttons:
• Sensor Setup (SENSOR SETUP) - see Section 3.4.1
• Calibration Setup (CAL SETUP) - see Section 3.4.2
• Alarm Setup (ALARM SETUP) - see Section 3.4.3
• Setup Time and Date (TIME SET) - see Section 3.4.4
• EXIT.

3.4.1 Sensor Setup

Each sensor can be turned ON or OFF.
For more information, see the flow charts in Section 7.6.
Figure 3-2. Sensor Setup
1. To bypass this setup, press the ▲ or ▼ button; otherwise, continue
as follows.
2. Press the button to enter the submenu.
3. Use the ▲ or ▼ button to change the option and confirm with the
button.
4. Repeat this procedure for all other sensors.
5. After setting the last sensor, continue to Calibration Setup.
3-9