Auto Provisioning - Cisco 7821 User Manual

Click on Admin Login in the top right corner of the administration interface.
Click on Advanced in the top right corner of the administration interface.
Click on Voice on the main menu.
Click on Ext 1 on the sub menu.
Enter or set the following details into the respective fields.
REQUIRED FIELDS:
Proxy (Proxy and Registration section)
Enter the Hostname or IP Address of the PBXware.
- Example for Hostname: voip.bicomsystems.com
- Example for IP Address: 192.168.1.10
User ID (Subscriber Information section)
PBXware extension number. Example: 1003.
Password
The Secret of the extension as received in the e-mail associated with this extension.
Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created
extension.
Navigate down to "Dial Plan" section. Clear the Dial Plan field, then copy and paste the
following value.
(*x.|**x.|*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.)
Click on the Submit button.
You'll have to wait sometime prior for the device to reboot. If everything is done as above
described, you should have successfully registered your device to PBXware.

Auto Provisioning

This chapter describes how to set UAD settings, create PBXware extension and register the
device using DHCP or Static IP address.
The following topics are covered:
- UAD Settings
- Creating Extension
- Registering Device