Table of Contents
Advertisement
XT-2 Reader Installation Manual & Data Sheet
2
Safety Instructions
2.1
Instructions
Read this manual carefully before using the XT-2 reader and take notice of warnings in
order to prevent injury and product damage.
Where local regulations exist, these are to be followed. The safety information in this
manual is a supplement to local regulations. It is the responsibility of the local project
manager to make certain that local regulations are known and followed.
The relevant manual (including this safety information) must be followed in any work
performed on the TagMaster products or systems.
The use of TagMaster's genuine spare parts is recommended. TagMaster will not
assume responsibility for any malfunction due to use of spare parts produced by a third
party.
2.2
Warnings
Warnings are used throughout this manual to alert the reader to special instructions
concerning a particular task or operation that may be hazardous if performed
incorrectly or carelessly. The warnings are preceded by the common hazard symbol.
Figure 1 Hazard Symbol
The following two levels of warnings are used:
Warning!
Warning means that an accident may occur if the safety precautions are neglected.
This type of accident may cause injury. It may also damage the product.
Caution!
Caution means that an accident may occur if the safety precautions are neglected. This
type of accident may damage the product.
© TagMaster
Doc no. 10-407 02
5 (26)
Advertisement
Table of Contents
