Table of Contents
Advertisement
Forced fan function
This function operates fan of CHILLER to remove
accumulated snow on the fan.
Snow accumulation prevention, which operates
occasionally when outdoor temperature is below
5 °C, is basic function Use this function by module
control or external contact when the snow is
actually accumulated on the fan only.
The factory default setting for initial entry is module
control. Extra setting is necessary to use external
contact.
Forced pump function
Only pump can be operated while the product is not
operating.
This function is available when using main control.
Refer to page 63 for trial operation for each unit.
Pump operation output
Electric switch for pump is field supply, and not
included in the product. Install interlock circuit
according to electrical wiring diagram when installing
the switch.
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other commercial wastes for disposal.
For information on Samsung's environmental commitments and product specific regulatory obligations e.g. REACH
visit: samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
Connecting module control
Refer to page 34 for wiring of module control.
Remote control wiring
For the remote control circuit (including the module
control), use the cord or vinyl sheath cable (0.75-1.25 mm2)
that meets the local power line requirements.
PVC cabtire rounded cord (VCTF JIS-C3306)
PVC cabtire flat cord (VCTFK JIS-C3306)
Control PVC insulated PVC cis cable (CVV JIS-C3401)
Control PVC insulated PVC cis cable (CVS JIS-C3401)
PVC insulated PVC cis cable rounded (VVR JIS-C3342)
PVC insulated PVC cis cable flat (VVF JIS-C3342)
600 V PVC cabtire cable (VCT JIS-C3312)
CAUTION
To prevent error, maintain strong cables, such as
power cable and voltage input cable, and weak
cables, such as module control power cable,
separately.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
89
English
Advertisement
Table of Contents
