Table of Contents
Advertisement
Installing vibraiton-isolation frame
During installation, make sure there is no gap
between the supporting base and the extra structures
such as vibration-isolation frame or H beam.
Supporting base must be constructed strongly to
support the bottom part of the vibration-isolation
mount.
After installing the vibration-isolation frame, unscrew
the fixing part on the top and bottom part of the
frame.
Installing discharge duct
Static pressure of the discharge duct should be within
the standard specification (80 kPa) when installing
the duct.
If you remove the fan guard to install the discharge
duct, make sure to install a safety net on the duct
outlet.
Foreign substance may enter into the product and
there could be a risk of personal injury.
Wear protection equipment at all times when making
galvanized sheet metal duct, since the worker may
get injured by the sharp parts.
When installing the product under the tree or
near forest, leafs may get into the product and
cause problems on the product. Therefore, install
a discharge duct to prevent foreign substance
infiltration.
19
English
Advertisement
Table of Contents
