Installation; Safety Information - Samsung AG042KSVANH Installation Manual

Dvm chiller. ag042ksv series; ag056ksv series; ag070ksv series
Hide thumbs Also See for AG042KSVANH:
Table of Contents

Advertisement

Safety information

DVM Chiller uses R-410A refrigerant.
When moisture or foreign substances enter into the
refrigerant pipe using R-410A, it may affect the
performance and reliability of the product. Safety
precautions must be obeyed when installing the
refrigerant pipe.
Since R-410A is an azeotrope refrigerant, it must be
charged in liquid phase. (A blend of the refrigerant
may change if you charge in vapor phase which
could cause product malfunction.)
The manufacturer is not responsible for any installation
or performance problem of the load side indoor unit
and water pipes.
Product for low temperature (below 5 °C) must use
anti-freeze to manage freezing point (concentration
of anti-freeze) according to usage range.
Freezing point of anti-freeze should be checked
periodically after installation during usage. (once a
year or more)
Maintain the temperature of chilled/heating water to
recommended range for stable operation.
The manufacturer is not responsible for freezing and
bursting of heat exchanger occurred by errors on

installation.

After completing the installation and test operation,
explain to the user how to use and maintain the
product. Also, hand over this installation manual so that
it can be stored by the user.
The manufacturer of DVM Chiller is not responsible
for the incidents occurred by improper installation.
Installer is responsible for any installation related
claims from the user occurred by neglecting warnings
and cautions stated in this manual.
Generally, DVM Chiller should not be relocated after
installation. But when it has to be relocated for
inevitable reasons, please contact Samsung's qualified
dealers for DVM Chiller.
WARNING
Hazards or unsafe practices that may result in severe
personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor
personal injury or property damage.
Follow directions.
Do NOT attempt.
Make sure the machine is grounded to prevent
electric shock.
Unplug the power plug from the wall socket.
Do NOT disassemble.
For operation
WARNING
Do not use water containing chemicals such as
chlorine for chilled/heating water as it can cause
corrosion on stainless steel or copper.
This may result in product malfunction.
Do not block air inlet or outlet of the product.
It may cause performance decrease or
malfunction of the product.
Do not attempt to disassemble, modify, or repair
the product.
Failure to do so may result in water leakage,
electric shock or fire. Contact the service center.
Do not use the product where oil particles such as
cooking oil and machine oil exist.
There are potential risks of electric shock or fire.
Do not use the product where smokes consisted
by oil particles, such as kitchen, flammable gas,
corrosive gas, or metallic dust exist.
Failure to do so may result in fire or
phenomenon.
3
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag056ksvanhAg070ksvanh

Table of Contents