Table of Contents
Advertisement
Electrical wiring work
Examples of using the cable striper
1 Adjust the blade position by coin. (Controller is at
the bottom side of the tool.) Fix the blade position
according to the outer sheath thickness of the power
cable.
2 Fix the power cable and tool by using the hook at the
top side of the tool.
3 Cut out the outer sheath of the power cable by
revolving the tool in the direction of the arrow, two
or three times.
42
English
Cable striper
4 At this moment, cut out the outer sheath of the
power cable by moving the tool toward the direction
of the arrow as shown in the illustration.
5 Slightly bend the wire and pull out the cut part of the
outer sheath.
Advertisement
Table of Contents
