Tools And Equipment; Installation Guidelines - Cisco Catalyst 6800IA Hardware Installation Manual

Tools and Equipment

Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if interconnections
Warning
are made using uninsulated exposed metal contacts, conductors, or terminals. Avoid using such
interconnection methods, unless the exposed metal parts are located within a restricted access location
and users and service people who are authorized within the restricted access location are made aware of
the hazard. A restricted access area can be accessed only through the use of a special tool, lock and key
or other means of security. Statement 1072
Warning No user-serviceable parts inside. Do not open. Statement 1073
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 inches (7.6
Warning
cm). Statement 1076
Hot surface. Statement 1079
Warning

Tools and Equipment

Obtain these necessary tools:
• A Number-2 Phillips screwdriver to rack-mount the switch

Installation Guidelines

When determining where to install the switch, verify that these guidelines are met:
• Clearance to the switch front and rear panel meets these conditions:
• Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent lighting
• Airflow around the switch and through the vents is unrestricted.
• Temperature around the unit does not exceed 113°F (45°C). If the switch is installed in a closed or
Catalyst 6800IA Switch Hardware Installation Guide
20
◦ Front-panel LEDs can be easily read.
◦ Access to ports is sufficient for unrestricted cabling.
◦ AC power cord can reach from the AC power outlet to the connector on the switch rear panel.
fixtures. Make sure that the cabling is safely away from other devices that might damage the cables.
multirack assembly, the temperature around it might be greater than normal room temperature.
Switch Installation
OL-30278-02