Removing An Sfp Module; Connecting To Sfp And Sfp+ Modules; Connecting To Fiber-Optic Sfp And Sfp+ Modules - Cisco Catalyst 6800IA Hardware Installation Manual

Removing an SFP Module

Removing an SFP Module

Connecting to SFP and SFP+ Modules

Connecting to Fiber-Optic SFP and SFP+ Modules

Class 1 laser product. Statement 1008
Warning
Caution Do not remove the rubber plugs from the SFP or SFP+ module port or the rubber caps from the fiber-optic
cable until you are ready to connect the cable. The plugs and caps protect the SFP module ports and cables
from contamination and ambient light. Before connecting to the SFP module, be sure that you understand
the port and cabling stipulations.
Procedure
Step 1 Remove the rubber plugs from the module port and fiber-optic cable, and store them for future use.
Step 2 Insert one end of the fiber-optic cable into the SFP or SFP+ module port.
Step 3
Insert the other cable end into a fiber-optic receptacle on a target device.
Figure 30: Connecting to a Fiber-Optic SFP Module Port
Step 4 Observe the port status LED.
Catalyst 6800IA Switch Hardware Installation Guide
40
Switch Installation
OL-30278-02