Display - Haier HC-C2100 User Manual

HC-C2100 User Guide
The phone provides six options: Ringer/Vibration/Vibr. then ring/Ring and vibrate/Silence
/Ascending tone.
8.1.3 Volume
This function allows you to adjust the volume output of the Ringer, Key Beep, Earpiece,
Message or Alarm.
8.1.4 Alerts
You can change the status of alerts detailed below.
1) Service change
When the alert for 'Service change' is enabled, it means that every time your phone has
lost the service (Network Signal) or regained the service (Network Signal) a phone alert is
sounded.
2) Minute beep
When the alert 'Minute beep' is enabled, during a phone call, as your call nears a minute's
duration, an alert will sound 10 seconds before every time.
3) Call connect
When the alert for 'Call connect' is enabled, the phone will sound an alert during the
conversation.
4) Call end
If an alert for 'Call end' is enabled, when a call is ended (either by you or because the call
is dropped), an alert will sound.
5) Fail on outgoing
If the alert for 'Fail on outgoing' is enabled, the alert will sound when the call is not
connected.
6) Charger beep
If the charger beep is 'On', every time your phone is connected or disconnected to the
charger, an alert will sound.
7) Power tone
The phone can be set to sound alert when it is switched on or off.

8.2 Display

You can customize your display by creating a banner, adjusting the backlight, selecting
the language or adjust LCD contrast.
8.2.1 Banner
You can edit the banner that will be displayed below your mobile phone service provider's
name.
27