Battery - Haier HC-C2100 User Manual

The missed calls and their numbers will be shown on screen.
3. New message
When the new message is received:
Your phone makes alert tones.
1)
Your phone will alert you new message arrival and their numbers.
2)

2.2 Battery

2.2.1 Installing and removing
To install the battery
1. Remove the battery cover by sliding the cover downwards.
2. Place the battery in the battery compartment and close the cover.
To remove the battery
1. Ensure your phone is turned off.
2. Remove the battery cover.
3. Use your fingernail to gently lift the lower edge of the battery outwards.
4. Take out the battery.
2.2.2 Charging the battery
The HC-C2100 can be charged either when it is switched on or off.
1. Plug the charger transformer into a standard outlet.
2. Insert the charger output into charging port of the bottom of the phone
3. The rolling of the electric quantity bar indicates that the phone begins to charge.
4. When the battery level is full and the electric quantity bar stops roll, the phone will
display 'Battery Full'.
5. After charging is complete, switch off the electric supply. Pull out the charger's jack.
Note:
When the battery level is low, the phone displays 'Battery Low!'
The battery can be charged whenever you want. However, using your phone while charging
can increase the charging time.
It is recommended that you charge the battery for three hours (full charging period) before you
HC-C2100 User Guide
9