Procom ECON-F Installation Manual page 10

Maximum 600-4000
RPM
Minimum 600-4000
RPM
RPM 1-999 Sec
Delay
Pick Up 80-1000
RPM
U
U
U
Service 10-999Hrs
Due Hour
Oil temp 40-250oC
Trip Level
Oil temp 1-999Sec
trip delay
Operating Instructions
Maximum allowed RPM of
Engine. Engine running at speed
above this is treated as over
speeding and a fault
is registered and engine stopped.
Minimum allowed RPM of
Engine.running at speed below
this is treated as over speeding
and a fault is registered and
engine Stopped.
Duration for which engine is
allowed to operated outside the
set RPM limits. If it continues to
operate beyond the limits for
more than the
set time a fault condition is
registered and engine stopped.
The engine stalling RPM. This
parameter defines the RPM
above which the engine will not
stall and
hence can be treated as running.
This is used to detect the engine
running condition after crank.
Service due warning is generated
after the engine has logged these
many hours.
The maximum OIL temperature
up to which the engine is allowed
to operate.
Monitoring time for the Oil temp
level to avoid false tripping of the
engine.
1600
1400
5
1000
250
o
95 C
10
Page - 9