ABB REM630 Product Manual page 63

ABB
Motor Protection and Control
REM630
Product version: 1.1
combination with the IED specific
connectivity package.
PCM600 offers extensive IED configuration
functions such as IED application
configuration, signal configuration, DNP3
communication configuration and IEC 61850
communication configuration including
horizontal communication, GOOSE.
When the web-browser based user interface
is used, the IED can be accessed either
locally or remotely using a web browser (IE
7.0 or later). For security reasons, the web-
browser based user interface is disabled by
Table 102. Tools
Configuration and setting tools
PCM600
Web-browser based user interface
REM630 Connectivity Package
default. The interface can be enabled with
the PCM600 tool or from the front panel user
interface. The functionality of the interface is
by default limited to read-only, but can be
configured to enable read and write access by
means of PCM600 or the local HMI.
The IED connectivity package is a collection
of software and specific IED information,
which enable system products and tools to
connect and interact with the IED. The
connectivity packages reduce the risk of
errors in system integration, minimizing
device configuration and set-up times.
Version
2.3 or later
IE 7.0 or later
1.1 or later
1MRS756977 D
Issued: 2011-05-18
63