Chapter 4 Checking Fibre Channel Card Information - Fujitsu ETERNUS AF Configuration Manual

Fibre channel for citrix xenserver

Hide thumbs Also See for ETERNUS AF:

Table of Contents

Chapter 4

Checking Fibre Channel Card Information

The WWNs of Fibre Channel cards are necessary when a system error occurs, when server access to the ETER-

NUS DX/AF is limited (such as when using the Host Affinity function), or when the ETERNUS DX/AF is connec-

ted to the server via Fibre Channel switches.

Use the methods described in the following examples to obtain the WWN information of the Fibre Channel

card to be used.

Example 1:

Check the WWN using the utilities that are provided by the Fibre Channel card vendors.

Emulex: LightPulse BIOS Utility

QLogic: Fast!UTIL

Example 2:

When XenServer is already installed, a WWN can be checked using the following tools that are installed in

XenServer.

Emulex: OneCommand Manager Command Line Interface (XenServer 5.6 or later)

HBAnyware Command Line Interface (XenServer 5.5)

QLogic: SANsurfer FC HBA CLI (XenServer earlier than 6.5)

QConvergeConsole CLI (XenServer 5.6 or later)

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix

XenServer

P3AM-4572-19ENZ0

Table of Contents

Eternus dx