Fujitsu ETERNUS AF Configuration Manual page 9

Chapter 1 Workflow
Installing and Setting Up ETERNUSmgr
If ETERNUSmgr is to be used, install it and set up the ETERNUS DX/AF.
"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 15)
•
"Chapter 6 Setting Up the ETERNUS DX/AF" (page 16)
•
Checking the setup and maintenance operations
•
"ETERNUS Web GUI User's Guide"
-
• Installing ETERNUSmgr
"ETERNUSmgr Install Guide"
-
Checking the ETERNUSmgr operational procedures
•
- "ETERNUSmgr User Guide"
Setting up the ETERNUS DX/AF
•
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
-
NUS DX/AF to be connected
Setting Up the Fibre Channel Switches
If a Fibre Channel switch is to be used, set it up now.
"Chapter 7 Setting Up the Fibre Channel Switches" (page 17)
•
• Setting up the Fibre Channel switches
"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"
-
Checking the Fibre Channel switch connection requirements
•
"Server Support Matrix for FC-SWITCH"
-
Setting Up XenServer
Set up XenServer to connect to the ETERNUS DX/AF.
"Chapter 8 Setting Up XenServer" (page 19)
•
Setting up XenServer and the Fibre Channel card
•
"8.1 Setting Up the Fibre Channel Cards" (page 19)
-
• Checking the Fibre Channel card driver versions
"Server Support Matrix"
-
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix
9
Copyright 2017 FUJITSU LIMITED
® ®
XenServer
P3AM-4572-19ENZ0