Table Of Contents - Snapmaker Quick Start Manual

Table of Contents

Table Of Contents2
Before You Start3
Get The Screwdriver Ready3
Used Symbols3
Assemble The 3D Printer4
Attach The Feet To The Base Plate4
Attach The Heated Bed To One Of The Linear5
Attach The Y Axis To The Base Plate6
Attach The Z Axis To The Base Plate7
Attach The X Axis To The Z Axis9
Attach The 3D Printing Module To The X Axis10
Attach The Controller To The Z Axis11
Attach Filament Holder To The Z Axis12
Connect The Modules To The Controller And Power On13
Use The 3D Printer14
Level The Heated Bed14
Load Filament14
Start Printing14
Level The Four Corners In Order16
Level The First Corner17
Get An A4 Paper18
Adjust The Distance Between The Heated Bed19
And The Nozzle19
Use The Paper To Adjust The Distance20
Level The Second To Fourth Corner21
Save The Settings22
Reset The Calibration To Factory Settings23
Reposition The 3D Printing Module24
Get The Nozzle Ready25
Hang The Filament Over The Filament Holder27
Insert The Filament28
Keep Inserting The Filament29
Clean The Filament30
Download The Software32
Generate G-Code33
Choose A Way To Print34
Support35