Adjust The Distance Between The Heated Bed; And The Nozzle - Snapmaker Quick Start Manual

3-in-1 3D Printer Quick Start Guide
Level the Heated Bed

Adjust the Distance Between the Heated Bed

5

and the Nozzle

Adjust the distance between the Heated Bed and the nozzle using
the
resistance on the paper from the nozzle. Use the
mm/0.2 mm/0.5 mm
every time you tap the Up or Down button.
Up and Down buttons. Keep adjusting until there is slight
buttons to decide how far the nozzle moves
0.1mm
Move 0.05
19