Led Indication Status - Raymarine CP370 Installation Instructions Manual

LED indication status

LED color LED code Status
Solid Power On
Green
Green 1 Normal
blink operation
Amber 1 Transducer
blink disconnected
Amber 2 No network
blinks detected
Amber 3 Unit
blinks overheating
Amber 4 *Transducer
blinks overheating
Amber 5 Under voltage
blinks (<10.2V)
Amber 6 Over voltage
blinks (>34.2V)
Amber 7 *Problem
blinks reading
transducer ID
(XID)
Red 1 General failure
blink
Red 2 Not Defined
blinks
User action
• None (normal power up takes <1 minute.)
• None
• Ensure transducer cable and connections are
secure and free from damage.
• Power cycle unit to recover transducer
information.
• If problem persists contact Raymarine technical
support.
• Ensure network is powered.
• Ensure network cable and connections are
secure and free from damage.
• If problem persists contact Raymarine technical
support.
• Ensure installation environment is within
recommendations.
• Unit will recover when temperature falls within
specifications.
• If problem persists contact Raymarine technical
support.
• Ensure installation environment is within
recommendations.
• Unit will recover when temperature falls within
specifications.
• If problem persists contact Raymarine technical
support.
• Ensure power cable and connections are secure
and free from damage.
• Ensure power supply cabling is consistent with
recommendations.
• If problem persists contact Raymarine technical
support.
• Ensure power supply levels are consistent with
recommendations.
• If problem persists contact Raymarine technical
support.
• Ensure transducer cable and connections are
secure and free from damage.
• Power cycle unit to recover transducer
information.
• If problem persists contact Raymarine technical
support.
• If combined with voltage warning, check power
supply and cables.
• Power cycle unit to recover.
• If problem persists contact Raymarine technical
support.
• If problem persists contact Raymarine technical
support.
CP370 / CP470 / CP570