Transducer Connections; Traditional Transducer Connection - Raymarine CP370 Installation Instructions Manual

In any grounding system, always keep the length of
connecting braid or wires as short as possible.
References
• ISO10133/13297
• BMEA code of practice
• NMEA 0400

4.4 Transducer connections

Warning: Transducer cables
Do not remove the transducer cable whilst
the product is powered on, doing so can
cause sparks. If the transducer cable is
accidently removed whilst the product is
powered on, switch the product's power
off, replace the cable and then switch the
power back on.
Caution: Do not cut transducer
cables
• Cutting the transducer cable severely
reduces sonar performance. If the
cable is cut, it must be replaced, it
cannot be repaired.
• Cutting the transducer cable will
void the warranty and invalidate the
European CE mark.
CP370 Transducer connections
The CP370 is a ClearPulse
designed for use with traditional transducers.
Transducers must be installed in accordance with
the instructions provided with the transducer.

Traditional transducer connection

1
Item Description
1
CP370
2 Extension cable (optional)
3 Transducer
TM sonar module
2
3
CP370 / CP470 / CP570
D13256-2