Led Diagnostics - Raymarine RVX1000 Installation Instructions Manual

LED Diagnostics

RVX1000
The LED on the front panel of the unit provides information on the status of the sonar module and
notifies users of any problems within the unit. The LED blinks the following colors:
• Green — shows the unit is operating normally.
• Amber — warns of a problem in the unit.
• Red — shows that there is an error in the unit.
The number of times the LED blinks is a code which represents the errors or warnings as shown
in the LED indication status table. If there are multiple warnings or errors, the codes are given in
sequence with a 2 second pause between blink patterns.
LED indication status
LED
color LED code
84
Status
Solid Power On
Green
Green 1 Normal
blink operation
Amber No network
2 blinks detected
User action
• None (normal power up takes <1
minute).
• None.
• Ensure network is powered.
• Ensure network cable and
connections are secure and
free from damage.
• If problem persists contact Raymarine
technical support.