Resetting The Sonar - Raymarine CP370 Installation Instructions Manual

LED color LED code
Note: *Not applicable to CP370.
Note: During a software upgrade process the LED will be solid Green and change to blinking Green on
successful completion.
Note: If any other LED sequence other than described above is seen and persists please contact
Raymarine technical support.

Resetting the sonar

The reset function restores the unit to its factory
default values.
Note: Performing a factory reset will clear speed
and temperature calibration settings and the depth
offset.
1. Using a compatible Raymarine multifunction
display go to the Fishfinder application page.
2. Select Menu from the side menu.
3. Select Set-up.
4. Select Sounder Set-up.
5. Select Sonar reset.
6. Select Yes to confirm.
The unit will now be reset to factory default settings.
System checks and troubleshooting
Status
Red 3 Ambient
blinks temperature too
hot
Red 4 Problems
blinks with internal
database
User action
• Ensure installation environment is within
recommendations.
• Unit will recover when temperature falls within
specifications.
• If problem persists contact Raymarine technical
support.
• Power cycle unit to recover.
• If problem persists contact Raymarine technical
support.